Breadcrumb navigation
Page tools
Restorative Cleaning
Rodents
MARCOR works closely with major extermination contractors to remove rodent remains and nesting materials and will thoroughly clean or tear out damaged areas. MARCOR can also assist with access prevention by repairing and/or sealing rodent entry points.
Typically, MARCOR isolates and contains affected areas prior to cleaning with poly barriers. HEPA filtered air movers may be installed in the containment and air is exhausted to the building exterior to reduce and remove rodent odors. Workers wear full-body protective suits, gloves, and half-face respirators during cleaning activities. Depending upon the site-specific circumstances MARCOR may remove ceiling tiles and grids, for example, and perform HEPA-vacuuming and wet wiping with a bleach solution or may replace building materials depending upon condition. Affected sheetrock and insulation may be removed. After rodent nesting materials and droppings are removed, contaminated areas are carefully cleaned with bleach solution. Hard cap ceilings may be accessed, vacuumed, and wiped, as well as above-ceiling conduit, piping, and ductwork. MARCOR may also remove food stock, merchandise, or other items from shelves or bins and clean everything or dispose of heavily damaged items, as appropriate.
Bats and Pigeons
From bell towers to attics to crawl spaces, accumulated excrement from pigeons, bats, or other animals can be a serious biohazard. MARCOR is experienced in safe decontamination and removal and can assist with repairs to prevent further intrusions.
Bedbugs
Cimex lectularius, the common bedbug, has been making an alarming comeback in U.S. hotels, cruise ships, and elsewhere. To combat this increasing problem, MARCOR provides a new heat technology that is lethal to bedbugs and their eggs, and follows this with restorative cleaning services to return your facility to the best possible condition. Both you and your guests will get a good night’s sleep!
Graffiti
MARCOR offers a new "low pressure-heated" surface cleaning technique for graffiti removal. This technique is proven safe on various materials including wood, steel, fiberglass, vinyl siding, etc. and leaves no damage or contamination to the underlying surface. It rapidly removes graffiti without damage to your building.
This cleaning technique uses only the earth's natural elements – volcanic sand, fresh heated water, and low-pressurized air. It offers a short setup time, quick completion, and is cost-effective. Dust levels are suppressed within the vaporized elements, allowing this method to be used safely within populated urban areas and enclosed environments.
For additional information, call MARCOR’s corporate headquarters at 1-800-547-0128 or send email to info@marcor.com.
